Die Casting Scope
200T + 300T
Focused on small-to-medium aluminum die casting parts and compact aluminum housings
Factory capabilities
In-House Aluminum Die Casting, Machining & Finishing Capabilities
Focused on small-to-medium aluminum die casting parts, LED light housings, brackets, decorative covers, and OEM custom aluminum hardware parts. The factory capability is aligned with realistic 200T and 300T machine scope for compact aluminum products and housings.
The product mix includes automotive LED lights, motorcycle LED lights, LED work lights, compact aluminum housings, decorative non-load-bearing caliper appearance covers, and OEM aluminum parts produced from drawings, samples, or custom project requirements.
Secondary Equipment
17
7 drilling machines, 7 tapping machines, and 3 polishing and grinding machines
OEM Input
Drawings + Samples
OEM aluminum parts manufacturing based on drawings, samples, or custom project requirements
Capability focus
Compact aluminum parts, machining, and finishing
Best-fit parts
LED work light housings, heat sink housings, brackets, covers, end caps, enclosure shells, and compact aluminum hardware accessories.
OEM workflow
Drawings, engineering review, mold development, die casting, machining, finishing, inspection, packaging, and shipment support.
Equipment depth
Die casting, drilling, tapping, polishing, and surface finishing support inside one factory workflow.
Product scope
OEM small aluminum die casting parts produced within realistic 200T and 300T factory capacity.
Factory equipment overview
Key in-house equipment for die casting, machining, and finishing
The capability overview stays grounded in the actual factory setup for compact aluminum part production and secondary processing.
200T Aluminum Die Casting Machine
Used for compact aluminum housings, brackets, end caps, covers, and other small-to-medium die cast parts with practical geometry.
300T Aluminum Die Casting Machine
Supports slightly larger small-to-medium aluminum parts within realistic factory scope for light housings, shells, covers, and OEM hardware accessories.
Multi-axis Drilling Support
Supports repeatable hole processing, mounting-point preparation, and secondary machining for aluminum parts and housings.
Multi-axis Tapping Support
Used for threaded features, assembly-related hole preparation, and OEM aluminum part functional detail work.
Polishing and Grinding Equipment
Provides surface preparation and appearance improvement before finishing or final visual inspection.
Surface Finishing Coordination
Aluminum anodizing, powder coating, and spray painting are coordinated with polishing and grinding preparation.
Aluminum die casting capability
The factory stays focused on small aluminum die casting parts and compact housings that fit 200T and 300T machine capacity.
Important accuracy
Decorative covers only
Brake caliper covers are decorative non-load-bearing appearance covers only and are not braking-force components.
Aluminum die casting capability
Realistic part scope for compact OEM aluminum manufacturing
The page is intentionally limited to manufacturable small-to-medium aluminum parts suitable for the factory’s 200T and 300T machines.
Aluminum LED Light Housings
Compact aluminum housings and shells for work lights, auxiliary lights, and industrial lighting-related product programs.
Heat Dissipation Aluminum Housings
Small-to-medium aluminum housings designed around heat dissipation, light body structure, and practical assembly requirements.
Compact Aluminum Brackets
Compact brackets and support parts with drilling and tapping features for lighting and hardware applications.
Aluminum End Caps and Covers
Aluminum end caps and closure parts for housings, shells, and accessory assemblies requiring a finished appearance.
Small Aluminum Enclosure Shells
Compact enclosure shells for lighting, hardware, and OEM aluminum accessories suited to 200T and 300T die casting capacity.
Decorative Non-load-bearing Covers
Appearance-focused covers, including non-load-bearing caliper appearance covers, produced as compact aluminum exterior parts only.
Custom OEM Aluminum Hardware Parts
Custom aluminum hardware parts manufactured from drawings, samples, or custom project requirements for global B2B buyers.
Machining and secondary processing
Secondary operations that support functional fit and appearance
Drilling, tapping, polishing, grinding, deburring, assembly support, and packaging coordination are part of the broader OEM part manufacturing flow.
Secondary Machining for Aluminum Parts
Secondary machining supports hole processing, threaded features, mounting details, and assembly-related geometry on compact aluminum parts.
Surface Conditioning Before Finishing
Surface conditioning improves appearance and prepares the part for anodizing, powder coating, spray painting, or direct inspection.
Edge and Visible Area Preparation
Part edges and key visible areas can be prepared before finishing or packing to improve presentation and handling quality.
Basic Assembly Coordination
Basic assembly coordination can be arranged where the OEM project needs bracket matching, cover fit-up, or related component preparation.
Export Packaging Support
Export-oriented packaging and buyer-defined packing requirements are coordinated before shipment release.
Surface finishing
Appearance and protection options for aluminum parts
The finishing capability is positioned around project appearance, corrosion resistance, and wholesale presentation requirements.
Aluminum Anodizing Support
Used where the part needs a clean metallic appearance, corrosion resistance, or controlled finish tone on exposed aluminum surfaces.
Powder Coating for Aluminum Parts
Suitable for durable exterior coverage on aluminum housings, brackets, covers, and custom hardware accessories.
Spray Painting and Color Matching
Applied where the project requires color matching, market-specific appearance, or brand-oriented visual presentation.
Polishing and Grinding Preparation
Supports appearance preparation and surface improvement before finishing or final shipment inspection.
OEM project workflow
From buyer input to finished shipment
The OEM aluminum parts manufacturing process is structured around review discipline, machining support, finishing, inspection, and export packing.
Step 01
Drawings or samples received
Step 02
Engineering review
Step 03
Mold development
Step 04
Die casting
Step 05
Drilling and tapping
Step 06
Polishing / grinding
Step 07
Surface finishing
Step 08
Inspection
Step 09
Packaging and shipment
Industries supported
Buyer industries aligned with compact aluminum part capability
The factory capabilities are positioned for practical B2B categories that use compact aluminum housings, shells, covers, and OEM accessory parts.
LED Work Light Housing Programs
Compact housings, heat sink shells, covers, and brackets for LED work lights and related lighting product lines.
Automotive LED Light and Accessory Parts
Automotive LED lights, compact aluminum housings, decorative covers, and appearance-focused accessory components.
Motorcycle LED Light Housing Parts
Motorcycle light housings, small aluminum lamp bodies, and compact OEM accessory parts for distributors and private-label buyers.
OEM Aluminum Hardware Accessories
Custom aluminum hardware parts, end caps, brackets, shells, and other small-to-medium OEM aluminum accessories.
Off-road and Utility Equipment Lighting Parts
LED work light housings, mounting parts, and compact aluminum accessories for off-road and utility equipment programs.
Global B2B OEM Project Buyers
Project manufacturing for global wholesalers, importers, distributors, aftermarket brands, and OEM buyers.
Quality and production control
Quality content stays practical: dimensional control, surface checks, thread inspection, sample confirmation, and packaging review before shipment.
Quality and production control
Inspection content matched to compact OEM part supply
The quality positioning emphasizes controlled review and clear production checkpoints rather than overstated claims.
- Dimensional checks on critical mounting points and geometry
- Surface appearance checks before finishing approval or packing release
- Thread and hole inspection after drilling and tapping operations
- Sample confirmation before mass production release
- Packaging checks before shipment
Final CTA
Send drawings, samples, photos, and market requirements for quotation
Global B2B buyers can send drawings, samples, product photos, quantity, surface finish, and target market requirements for OEM aluminum parts, compact housings, and lighting-related product projects.
Capability RFQ
Contact us with drawings, samples, photos, surface finish needs, packaging details, and target market expectations.
Direct contact